The ERX-15 Case Erector is an automatic case erector designed to form, seal, and pack corrugated cases efficiently. Here are its key features and specifications:

• Speed: Up to 15 cases per minute.
• Case Size Range:Minimum: 7” (Length) x 5” (Width) x 5” (Depth)
• Maximum: 19.5” (Length) x 15.5” (Width) x 19.5” (Depth)
• Case Hopper Capacity: Holds up to 200 cases (depending on flute type).
• Construction: Made from steel with a powder-coated exterior for durability in industrial environments.
• Operation: Simple to use—load cases into the magazine hopper and set to run or jog mode. The machine uses eight vacuum suction cups to form and square the case, then seals the bottom automatically.
• Adjustments: Tool-free, with easy-to-use hand-tighten knobs and cranks for quick setup and changes.
• Electrical Requirements: Typically 110V, 50/60Hz, 1-Phase.
• Air Requirements: 80 PSI @ 12 CFM.
• Case Types: RSC (Regular Slotted Container), RH (Right Hand), and supports A, B, and C-flutes.
• Tape Sealing: Uses 2” wide pressure-sensitive tape (optional 3” wide).
• Dimensions: Approximately 94.3” (L) x 82” (W) x 82.8” (H).

The ERX-15 is known for its reliability, ease of use, and minimal maintenance requirements, making it a popular choice for packaging lines.